A simple, collapsible, decorative wood bowl

Since I’ve moved to Sun City Hilton Head, I’ve done a great deal more woodworking than I have every done before. I’ve modeled most of these efforts in SketchUp or Microsoft 3D Builder before tackling anything too difficult.

The following are a couple of simple designs I’ve created for those getting started in woodworking. They look interesting, without being too complicated.

One is a Pineapple shaped bowl and the other is a bowl shaped like a Pumpkin. Both use the same technique to use a single piece of wood (about an inch thick) to form the handle and a spiral cut piece that can be expanded to form a bowl. When made properly, the piece can me laid flat or expanded into a bowl. Pegs can be used to attach the handle to the bowl.

Here is the Pineapple:

pineapple bowl

I’ve found it works best to print the design on an 11×17 piece of paper. Tape it to the board. Cut out the design with a scroll saw or sabre saw. Then align the parts and determine where the holes need to be cut for the pegs, so the handle can fully extend and expand the bowl. You may need to cut the handle down to fit.

Here is the Pumpkin (I am going to try this one on an 8 1/2 x 11 sheet of paper):

pumpkin bowl

Here is what an Apple bowl looks like fully extended – my wife got that when she was teaching and it inspired me to create the other designs.

Apple bowl

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s